Alarm Monitoring Module (AMM)

The Alarm Monitoring Module allows the system to monitor different devices, such as alarms, motion detectors, temperature sensors, etc.

The AMM will notify the system operator of any changes in condition (i.e., forced entry, low temperature).

The module connects to any port on the 508/502 panel, and can monitor up to 16 different devices per module. Multiple modules can be used to accommodate all required devices.

Benefits

High Capacity
Facilitates monitoring of up to 16 alarm, and general purpose input devices
(in addition to tamper, communication failure, and auxiliary 12 VDC low
voltage conditions) by the System Galaxy controllers.

Supervision Options
Each module can be set with user defined supervision configurations.
Supervision can vary from module to module.

Intelligent Controller
Communicates with the controller bi-directionally to monitor the status
of all connected devices. Informs the controller if any of those devices
experience a change in condition.

Partitionable
Each device can be given a descriptive name and priority level. Input
devices can control output relays for annunciation purposes. Additional,
device specific data can also be configured.

Flexible
Other devices, in addition to alarm devices, can also be monitored
(i.e. temperature sensors, flow meters, pressure sensors, etc.).

Global Functionality
Multiple inputs (i.e door opening, alarm activation) can can be linked
to multiple outputs (i.e lighting, office machine activation) anywhere
in the system.

Specifications

Input Power:
12 VDC at 2 amps
(from panel)

Controller to AMM Connection:
Eight (8) Conductor, 22 AWG Shielded Cable
Maximum wiring distance to controller is 500 feet

Device to AMM
Connection:
Two (2) conductor 22 AWG Cable
Maximum wiring distance to device is 1000 feet

Relay Specification:
Form “C” rated 1.5 amps @ 24 VDC

Temperature Range:
-10ºC to +60ºC, non-condensing

Auxiliary Power Supply:
12 VDC required for external devices (i.e. motion detector)